|
Designed to be used on the D, E, and F
series enlargers, the Xenomega was very much a specialty head intended for
graphics arts applications such as direct-screen colour separations, and
photo murals. It came with a wall mounted blower and 220v power supply,
with the lamp chamber simply replacing the normal light cap of the
enlarger's condenser lamphouse. It's 1500w daylight balanced Xenon lamp
gave 70 times the printing speed of a conventional 75w PH211 lamp.
Used Advice: The Xenomega is a very
high output light source and should not be considered for normal enlarging
work. Used units will need to have the power supply thoroughly inspected
by a technician before use due to possible deterioration of the
high-voltage components. |
